Kan jeg sende mine prøver direkte til FCMtesting?

Ja, du kan sende dine prøver direkte til vores laboratorium i Odder, syd for Aarhus. Vi modtager materialer fra hele Danmark og EU. Kontakt os for yderligere vejledning.

Hvor meget koster det at få testet mine fødevarekontaktmaterialer hos FCMtesting?

Priserne varierer afhængigt af produkttype og testens kompleksitet, typisk fra 1.000 kr til over 25.000 kr. Vi udfører kun nødvendige tests for at sikre overensstemmelse med lovgivningen og undgå unødvendige gentests. Eksempler: Simpel migrationstest: 1.000 – 3.500 kr; Test af sammensatte materialer: 5.000 – 12.000 kr; Fuldt testprogram inkl. dokumentation: 15.000 – 25.000+ kr. Kontakt os for et skræddersyet tilbud.

Hvordan sikrer FCMtesting, at test ikke gentages unødigt?

Vi vurderer tidligere testresultater og dokumentation for dine produkter, så vi kun udfører relevante og nødvendige tests. Dette sparer tid og omkostninger og sikrer, at dokumentationen stadig er gyldig. Kontakt os for rådgivning om dit specifikke produkt.

Hvornår er det nødvendigt at genteste fødevarekontaktmaterialer?

Gentest er kun nødvendig, hvis materialets sammensætning, produktionsmetode eller leverandør ændres, eller hvis lovgivningen ændrer sig på en måde, der påvirker overholdelse. Hvis intet er ændret, og dokumentationen stadig er gyldig, er gentest normalt ikke nødvendig. Kontakt os for vurdering.

Er dokumentationen fra FCMtesting gyldig i hele EU?

Ja, vores overensstemmelseserklæringer og testdokumentation følger gældende EU-regler og kan bruges i alle EU-lande. Dette inkluderer overholdelse af EU 1935/2004 og relevante nationale regler.

Hvilke regler skal jeg som virksomhed følge for fødevarekontaktmaterialer?

FCMtesting anbefaler, at virksomheden: identificerer relevante EU- og nationale regler, udarbejder eller indhenter en overensstemmelseserklæring (DoC), sikrer, at nødvendig test er udført og dokumenteret, og får professionel rådgivning og test hos et akkrediteret laboratorium. Kontakt os for hjælp og rådgivning.

Hvor lang tid tager test af fødevarekontaktmaterialer?

Standardtests tager typisk 2-4 uger afhængigt af materialetype og kompleksitet. Test kan tage få dage til flere uger afhængig af kompleksitet. Dokumentationsgennemgang tager normalt et par dage, og overensstemmelseserklæringer typisk få dage efter test. Kontakt os for et mere præcist tidsestimat.

Hvor kan jeg finde mere information om lovkrav til fødevarekontaktmaterialer?

Pålidelige kilder inkluderer Fødevarestyrelsen – officielle krav og vejledninger, Den nordiske tjekliste – guide til overensstemmelseserklæringer, EUR-Lex – online EU-lovgivning, og FCM Testings vidensartikler. Kontakt os for yderligere rådgivning.

Hvad betyder glas- og gaffelsymbolet på køkkenudstyr og emballage?

Symbolet viser, at materialet er beregnet til kontakt med fødevarer. Det betyder ikke, at produktet er testet eller godkendt af myndighederne – producenten har ansvaret. Læs mere om fødevarekontaktmaterialer.

Hvad indeholder EF-forordning 2023/2006 om god fremstillingspraksis (GMP)?

Forordningen kræver etablering af dokumenteret kvalitetssikringssystem, kontrollerede produktionsforhold samt relevant dokumentation og sporbarhed. Formålet er at sikre, at produktionen sker under forhold, der garanterer overensstemmelse med lovgivningen. Læs hele forordningen. Kontakt os for hjælp med implementering.

Hvad kræver EU’s rammeforordning 1935/2004 for fødevarekontaktmaterialer?

Materialerne må ikke afgive skadelige stoffer, ændre fødevarens sammensætning, forringe smag eller lugt, og skal være sikre under anvendelsesforhold. Producenten skal kunne dokumentere overholdelse. Læs hele forordningen. Kontakt os for hjælp og rådgivning.

Hvorfor vælge FCMtesting frem for andre testlaboratorier for fødevarekontaktmaterialer?

FCMtesting sikrer ISO/IEC 17025:2017 akkrediterede test, dokumenteret overensstemmelse med EU-regler, relevant rådgivning og kun nødvendige tests, hvilket minimerer gentest og omkostninger. Vores dokumentation er gyldig i hele EU, og vi tilbyder professionel vejledning hele vejen.

FAQ - FIND ANSWERS TO SOME OF YOUR QUESTIONS HERE

FCMtesting ApS is a DANAK-accredited laboratory in Odder near Aarhus, specialising in testing, documentation and advisory services for food contact materials (FCM). We help producers, importers and distributors throughout Denmark and the EU comply with EU legislation — including EU 1935/2004 and material-specific regulations.

Below you will find answers to the most frequently asked questions about our test methods, pricing, documentation requirements and Declarations of Compliance.

A Declaration of Compliance (DoC) is a legally required document confirming that a food contact material complies with applicable EU legislation — and it is the responsibility of the producer or importer to prepare it.

The declaration must be made available to authorities and customers upon request and must document that the material has been tested and complies with the requirements of EU 1935/2004 and any material-specific regulations.

At FCMtesting in Odder near Aarhus, we help Danish and European companies prepare accurate, authority-ready Declarations of Conformity — based on accredited testing and more than 25 years of specialist expertise in food contact materials.

Read more about Declarations of Compliance (DoC) or Contact us for guidance.

All companies producing, importing or selling food contact materials in the EU must comply with EU 1935/2004 and relevant material-specific legislation — and be able to document it.

FCMtesting recommends that the company:

Identifies relevant EU and national regulations. read more about legislation here
Prepares or obtains a Declaration of Compliance (DoC)
Ensures that necessary testing is performed and documented
Get professional advice and testing from an accredited laboratory

EU Regulation 1935/2004 requires that food contact materials do not release harmful substances into food and do not impair taste, odour or composition — and that the producer is able to document this.

Specifically, this means that materials:

Must not release substances into food in quantities that pose a health risk
Must not alter the food's composition, taste or odour in an unacceptable manner
Must be safe under conditions of use
Must be supported by documentation that can be presented to authorities

Read the full regulation on EUR-Lex | Contact us for assistance in ensuring compliance.

EU Regulation 2023/2006 on GMP requires that producers of food contact materials have a documented quality assurance system and controlled production conditions.

In practice, the regulation requires:

Establishment of a documented quality assurance system
Controlled production conditions
Traceability and relevant documentation throughout the supply chain.

The aim is to ensure that every stage of production contributes to a final product that complies with regulatory requirements.

Read the full regulation on EUR-Lex | Contact us for help with implementation.

Yes — FCMtesting is DANAK-accredited under ISO/IEC 17025:2017, and our results are recognised by authorities throughout the EU.

We perform all tests under our ISO/IEC 17025:2017 accredited management system, hvilket sikrer, at analyserne er systematiske, dokumenterede og overholder internationale standarder. Vi stiller samme krav til eventuelle underleverandører, og vores resultater accepteres af både Fødevarestyrelsen og tilsvarende myndigheder i resten af EU.

See our accreditation with DANAK and the specific accredited test methods.

Yes — Declarations of Compliance (DoC) and test documentation from a DANAK-accredited Danish laboratory are valid in all EU member states.

FCMtesting's documentation complies with EU Framework Regulation 1935/2004 and other applicable EU regulations, and can be used directly with authorities, customers and trading partners throughout the EU.

Read more about Declarations of Compliance (DoC) | Contact us for guidance on documentation for your specific markets.

Testing of food contact materials typically costs between EUR 135 and EUR 3,350+ depending on material type and complexity.

At FCMtesting in Odder near Aarhus, we always assess your specific needs to ensure only relevant tests are carried out — saving you time and money.

Indicative price levels:

Simple migration test: €135 – €470
Testing of composite materials: €670 – €1,610
Full testing program including documentation: €2,010 – €3,360+

All prices are indicative and depend on the product specifications.

Contact us for a customized quote.

Yes — FCMtesting receives samples from throughout Denmark and the EU directly at our laboratory in Odder near Aarhus.

We are one of Denmark's specialised, DANAK-accredited laboratories for food contact materials, accepting samples from producers, importers and distributors throughout Denmark and the EU.

Contact us for guidance on shipping and handling.

By obtaining an expert assessment of existing documentation — many companies already have valid test results and do not need to start from scratch.

Hos FCMtesting gennemgår vi altid jeres tidligere testresultater og dokumentation, inden vi anbefaler nye tests. Hvis dokumentationen stadig er gyldig og dækkende, kan I spare både tid og omkostninger.

Contact us for an assessment of your documentation.

Retesting is required if the material, production process or supplier changes — or if EU legislation is tightened in a way that affects your products.

Retesting is specifically relevant if:

The composition of the material, production method or supplier changes
EU legislation is being tightened in a way that affects the requirements for your products

If nothing has changed and the documentation is still valid, retesting is usually not necessary.

Customers with a service agreement with FCMtesting do not need to monitor regulatory changes themselves — we continuously track relevant EU legislation and proactively contact you if a change may affect your products or documentation.

Contact us for an assessment of your specific situation.

A standard test of food contact materials typically takes 2–4 weeks from receipt of sample to completed report.

The test itself: a few days to several weeks depending on material type and complexity
Documentation review: normally 1–2 working days
Declarations of Compliance: typically a few days after testing

If you have a time-critical situation, please do not hesitate to contact us — we always aim to find the fastest responsible solution.

Contact us and get a more accurate time estimate..

The glass and fork symbol indicates that the material is intended for contact with food — but it is not a regulatory approval and does not guarantee compliance with legislation.

Det er producentens ansvar at sikre, at materialet faktisk overholder gældende EU-krav og er korrekt testet og dokumenteret. Symbolet alene er ikke tilstrækkelig dokumentation over for myndigheder eller kunder.

Read more about food contact materials or Contact us for guidance.

The most reliable sources for Danish companies are the Danish Veterinary and Food Administration, EUR-Lex and FCMtesting's own specialist guidelines.

Recommended sources:

FCMtesting is one of Denmark's only specialised, DANAK-accredited laboratories focused exclusively on food contact materials — combining accredited testing with deep specialist expertise.

In practice this means:

Only relevant tests — we always review existing documentation and avoid unnecessary retesting
Documentation ready for regulatory inspection in Denmark and throughout the EU
Tailored testing programmes adapted to your specific product and market
Proactive monitoring of EU regulations for customers with a service agreement — we contact you if a regulatory change may affect your products or Declarations of Compliance, before it becomes a problem.